- (512) 487-5116
- Mon - Thurs 9:00 - 4:30 CT
The Sunstone Classic Series Flush Style 12 In. x 12 In. Access Door is your perfect solution for Outdoor Plumbing, Gas, Electrical, or Safety Access great for multiple installation types like Dry-Wall Board, Brick, or Veneer Stone. In addition, this door is great for accessing the Bottom Vent of a Ceramic Grill and features a Turn-Latch which can be optionally replaced for a Locking Latch keeping internal components safe. The door is specially designed, so it can be turned 180 degrees allowing it to be opened either Left or Right Swing. The Classic Series Doors are the Most Sleek and Stylish of all our many series of components with its even #4 Light Brushed Finishes, they are offered with same matching finish as grill, and other doors and drawers with polished handles. Doors fit flush against island exterior wall, so it’s perfect for multiple types of installation whether on Stone or Stucco, and with pre-drilled frame holes allow for easy installation.
Classic Series Flush Style 12″x12″ Utility Access Door – C-SD12
$108.00
In Stock - Ready for shipping within 2 Business Days
- Solid 16 Gauge 304 Stainless Steel Construction
- Top & Bottom Magnets Secure Doors
- Left or Right Swing Installation
- Product Size: 12" W x 12"H x 1-5/8"D
- Cut-Out Size: 9-1/4" W x 9-1/4" H
Product Documents
The Classic Series Flush Style 12″x12″ Utility Access Door – C-SD12 is a product that offers a convenient and stylish solution for accessing utility areas. Its key features include a flush style design, a 12″x12″ size, and a durable construction. The benefits of this access door include easy installation, a seamless appearance, and reliable functionality. Its unique selling points are its sleek flush style and its ability to blend seamlessly with any decor.
Perfect for the job
Good buy, completes the job for custom fire pit.
Using the door as an access panel Glad i got it
Love it
I bought this to use as s a pass door through my garage wall for my electric car charging cable. I had a sheet metal shop add a keyhole and keyhole sw...More
I bought this to use as s a pass door through my garage wall for my electric car charging cable. I had a sheet metal shop add a keyhole and keyhole swivel door so the door could close and I could keep the cable in place. The sheet metal shop labor cost more than the entire door. I then drilled a hole through the locking dog and inserted a removable pin so it is lockable. It was an easy install in a stucco wall as the return on the frame was deep enough to frame the opening and mount to wood I added to shore up the installation. the finished install works great. I get a lot of comments from my neighbors about the setup. I live at the beach so I got a stainless steel model and then painted it to match the surrounding wall. Excellent quality and excellent price.
This a great little door. And if it had been a 12” door it would be rated a five. It’s described as being a 12” door, but that’s not true. The frame i...More
This a great little door. And if it had been a 12” door it would be rated a five. It’s described as being a 12” door, but that’s not true. The frame is 12” and the door is 9”. When describing a door the measurement should be of the object you’re describing (e.g. door), not the door plus frame (unless that is clearly explained).
Submit Product Review
You must be logged in to post a review.
Classic Series Flush Style 12″x12″ Utility Access Door – C-SD12
$108.00
In Stock - Ready for shipping within 2 Business Days
- Solid 16 Gauge 304 Stainless Steel Construction
- Top & Bottom Magnets Secure Doors
- Left or Right Swing Installation
- Product Size: 12" W x 12"H x 1-5/8"D
- Cut-Out Size: 9-1/4" W x 9-1/4" H
Downloads
Downloads
Related Products
good quality parts
What is the minimum counter depth to install Ruby 4 Burner Pro-Sear 36″ with a wall behind the grill? (I understand from the manual that the cut out ...More
What is the minimum counter depth to install Ruby 4 Burner Pro-Sear 36″ with a wall behind the grill?
(I understand from the manual that the cut out is is 22", and that I need to leave at least 4" behind the back of the grill and the wall, but what I don't understand is how far the back of the grill extends behind the cut out. Because I don't know how far the back of the grill extends behind the cut out, I can't calculate the counter depth I need to leave 4" between the back of the grill and the wall.)
(I understand from the manual that the cut out is is 22", and that I need to leave at least 4" behind the back of the grill and the wall, but what I don't understand is how far the back of the grill extends behind the cut out. Because I don't know how far the back of the grill extends behind the cut out, I can't calculate the counter depth I need to leave 4" between the back of the grill and the wall.)
Hi - Measuring from the back of the grills FireBox it is 3-5/8" to the back edge of grill, and from the cut-out line its between 2-3 inches. The hood ...More
Hi - Measuring from the back of the grills FireBox it is 3-5/8" to the back edge of grill, and from the cut-out line its between 2-3 inches. The hood extends an additional 3" when Open, so is why you need a minimum 4" clearance. All this is illustrated on the grills Specification Sheet, you can download in the section box Downloads. Our office is open Monday 9AM Central TIme, at 512-487-5116 if you have additional questions.
Fabriquez de très bonne qualité!! Très belle porte!
Good product and delivery service
Looks great with my bbq
works great
Very nice doors good price happy
Nice matching doors
As described.
Looks great. Works great !
Great! Perfect for our fire ball columns.
Heavy duty. Looks good. Installed easily.
