44" ADA Compliant Combo Sink Base Cabinet - ADA44BC

The 44" ADA Compliant Combo Sink Base Cabinet (ADA44BC) converts for several uses and several levels of ADA compliance, from partial to full. It is wheelchair accessible. Lowered 2" peg legs and flush kick plates bring the total height to about 33" with the counter installed, below the 34" industry requirement.

The center front panel sets in a forward or back position. In the back position, two pull handles on the inner left and right sides help a person pull their wheelchair closer into the cabinet space, meeting the required ADA counter depths. The center panel also lifts so its top edge meets the lower lip of the sink, as shown with our ADA Compliant 37" double sink. To use the cabinet as a prep zone, leave out the sink or keep the center panel forward.

The inside angled panel comes out for access to plumbing or electrical, and there is a 1-gang internal electrical box. The cabinet is 304 stainless steel with recessed handles and comes fully assembled. Sunstone cabinets connect with pin-locks: lift each cabinet and drop it into the next. Much of the installation needs no tools, and most cabinet layouts go together in less than an hour. For a full bullnose counter, remove the counter-rail (the top horizontal rail) and let the counter overlap the front edge. The cabinet arrives set up. You fasten the door handle, hand-screw each adjustable leg in place and snap on the front and back kick-plates. See our warranty page for coverage.

Warranty

Coverage depends on the product. See the warranty page for the full terms.

Shipping & Delivery

All orders ship free to the 48 contiguous United States.

Larger (freight) shipments are curb-side only. A signature and possibly assistance may be required for unloading. We will work with you to arrange a delivery date and time, but the final details will be between you and the freight carrier.

IMPORTANT: ALL LTL DELIVERIES ARE CURBSIDE UNLESS WHITE GLOVE FEES ARE PAID. All reports of damage must be made within 3 business days after delivery.

Receiving Your Shipment

When the shipment arrives, please do the following:

• Inspect every box carefully before signing. There is no such thing as damage that is too small: dents, tears, crushed corners, punctures, or scuffs should all be noted.
• Take clear photos of any box that shows damage.
• On the delivery receipt, write down exactly how many boxes have visible damage. If it is electronic, have the driver show you where to notate the damage. Before handing it back, take a photo of the document showing your notation.

After the driver leaves, please immediately open and inspect the items themselves. If you find any damage, contact us with the following:

• A photo of the item unboxed with the damage visible
• A close-up photo of the actual damage
• A photo of the delivery document where you noted the box damage

These steps ensure we can file a claim quickly and get any replacement parts or items to you without delay.

Returns & Exchanges

Returns are accepted within 60 days of original purchase, in original packaging and unused, for a full refund minus a 15% Restocking Fee.

We recommend insuring products when shipping back to us. Returns will be rejected if the product is received damaged.

Full Shipping Policy → · Return Policy →