# Designer Series 13"H Multi-Configurable Tilt-out Paper Towel, Cutlery Drawer & Cutting Board Combo - DE-DPCF13

> Tilt-out paper towel holder with enclosed cutlery drawer and removable cutting board. 18" W x 13" H x 23" D, fits a 16-1/2" W x 11" H cut-out.

- Price: $610.00
- Availability: In stock
- SKU: DE-DPCF13
- Brand: Sunstone Metal Products
- Category: ODK Components > Designer Series Raised Style
- Page: https://sunstonemp.com/products/designer-series-13-h-multi-configurable-tilt-out-paper-towel-cutlery-drawer-amp-cutting-board-combo-de-dpcf13

## Description

The Sunstone Designer Series Raised Style 13" Tilt-Out Paper Towel, Cutlery Drawer and Cutting Board Combo (DE-DPCF13) pairs a tilt-out paper towel holder with an enclosed cutlery drawer and a removable poly cutting board.

It measures 18" W x 13" H x 23" D and fits a 16-1/2" W x 11" H cut-out. The 18" width matches the rest of the Designer Series lineup. It sits 1-1/2" off the finished wall, it works with veneer stone, stucco and masonry islands, and an extra 1/16" trim runs around all four sides of the frame.

The enclosure is fully sealed against the weather. The frame is 16 gauge 304 stainless steel and the panel is 18 gauge, with a solid stainless steel rod handle. The drawer runs on soft-close tracks, and adjustable self-leveling legs work for standalone or stacked installs. It can be set horizontally or vertically and pairs with Sunstone Cabinet Island products and other Designer Series components. See our warranty page for coverage.

## Specifications

| Spec | Value |
| --- | --- |
| Type | Paper towel holder |
| Series | Designer Series Raised Style |
| Style | Designer |
| Dimensions | 18" W x 13" H x 23" D |
| Cut-Out Size | 16-1/2" W x 11" H |
| Drawer Type | Paper towel combo |
| Drawer Tracks | Soft-close |
| Material | 304 Stainless Steel |
| Gauge | 16 gauge |
| Installation | Built-in |
| Drawer Panel Gauge | 18-gauge |
| Raised Off Wall | 1-1/2" |
| Handles | Solid Stainless Steel Rod |

## Features

- Size: 18" W x 13" H x 23" D
- Cut-out: 16-1/2" W x 11" H
- Tilt-out paper towel holder and enclosed cutlery drawer
- Removable poly cutting board
- Weather-proof sealed enclosure; soft-close drawer tracks
- 304 stainless steel: 16 gauge frame, 18 gauge panel; solid stainless steel rod handle
- Raised 1-1/2" off finished wall; 4" deep inside flange; 1/16" frame trim
- Adjustable self-leveling legs; horizontal or vertical install

## Options

- Product Configurations: 13"Height Double Drawer- DE-DD13 (+$390.00)

## Manuals & documents

- [DE DPCF13](https://sunstonemp.com/media/sites/site_affv5holph/manus-storage/DE-DPCF13_6b368b5b.pdf)

## Questions & answers

**Q: What warranty or support is there if I have a problem with this combo?**

Coverage details are on our warranty page. If you need help or have a claim, contact us with your order number and proof of purchase.

**Q: How should I clean the stainless and the cutting board after a BBQ?**

Wipe the stainless with mild soap and water, then dry it with a soft cloth so you don't get water spots. For tougher grease or fingerprints, use a stainless cleaner. The cutting board comes out, so you can wash it in hot soapy water or put it in the dishwasher for a deeper clean.

**Q: What's this made of, and how does it hold up outdoors?**

The unit is 304 stainless steel, which resists rust and corrosion and works well outside. The cutting board is typically a durable, food safe polymer that won't warp or crack outdoors. With basic care it'll keep looking and working great for a long time.

**Q: I have a custom-built kitchen. Will this fit my cabinet depth and framing?**

It's made for standard outdoor kitchen cabinet depths, usually around 24 to 26 inches. Your framing needs to support its weight and leave room for the paper towel holder and cutting board to tilt all the way out. Check the rough opening dimensions in the manual against your build.

**Q: How hard is it to put this tilt-out combo into an existing island?**

Most DIYers can do it. It's a raised style piece, so it sits flush with your countertop or cabinet face, and it needs a cutout of specific dimensions. Measure your opening carefully before you start, and have a second person help.