# Classic Series 12" x 12" Single Utility Access Door (Reversible) - C-SD12

> Reversible, non-vented 12" x 12" utility access door with turn-latch. 12" W x 12" H x 1-5/8" D, fits a 9-1/4" W x 9-1/4" H cut-out.

- Price: $86.00
- Availability: In stock
- SKU: C-SD12
- Brand: Sunstone Metal Products
- Category: ODK Components > Classic Series Flush Style
- Page: https://sunstonemp.com/products/classic-series-flush-style-12-x12-utility-access-door-c-sd12

## Description

The Classic Series 12" x 12" Single Utility Access Door (C-SD12) gives you a way into the island to reach valves, shut-offs and utility lines.

It measures 12" W x 12" H x 1-5/8" D and fits a 9-1/4" W x 9-1/4" H cut-out. The depth from the face to the frame mounting hole is 1", and it fits a typical 4" island frame.

The frame is 16 gauge 304 stainless steel and the door panel is 18 gauge 304 stainless steel, with a No. 4 light brushed finish and the same flush style as the rest of the Classic Series. The door is not vented and it is reversible: flip it 180 degrees for a left or right swing. It opens 180 degrees on exposed hinges and closes with a turn-latch, so there is no handle. See our [warranty page](https://sunstonemp.com/warranty) for coverage.

## Specifications

| Spec | Value |
| --- | --- |
| Series | Classic Series Flush Style |
| Item Number | C-SD12 |
| Width | 12" |
| Height | 12" |
| Depth | 1-5/8" |
| Dimensions | 12" W x 12" H x 1-5/8" D |
| Cut-Out Size | 9-1/4" W x 9-1/4" H |
| Venting | Non-vented |
| Door Swing | Reversible: flip 180 degrees for left or right swing |
| Door Opening | 180 degrees |
| Hinges | Exposed |
| Depth to Frame Hole | 1" |
| Material | 16 gauge 304 stainless steel frame, 18 gauge 304 stainless steel door panel |
| Finish | No. 4 light brushed |
| Handle | Turn-latch closure (no handle) |
| Installation | Built-in |

## Features

- Size: 12" W x 12" H x 1-5/8" D
- Cut-out: 9-1/4" W x 9-1/4" H
- Non-vented
- Reversible: flip 180 degrees for left or right swing
- Opens 180 degrees on exposed hinges
- Turn-latch closure, no handle
- Depth to frame hole: 1"; fits a typical 4" island frame
- 16 gauge 304 stainless steel frame, 18 gauge 304 stainless steel door panel; No. 4 light brushed finish

## Manuals & documents

- [C SD12](https://sunstonemp.com/media/sites/site_affv5holph/manus-storage/C-SD12_8b55b614.pdf)

## Questions & answers

**Q: This spot gets a lot of sun and rain. Will the door hold up?**

Yes. It's stainless steel, which resists rust and corrosion, so sun, rain and temperature swings won't hurt it. Just install it properly so water doesn't get into your island.

**Q: What warranty comes with this door, and what if I have a problem?**

Coverage details are on our warranty page. If something goes wrong, contact us with your order number and we'll help troubleshoot or set up a replacement if needed.

**Q: How do I keep this door looking good outside?**

Clean it regularly with mild soap and water. For stubborn spots or fingerprints, use a stainless steel cleaner and always wipe with the grain. Don't use abrasive cleaners or steel wool, they'll scratch it.

**Q: Will this door match my stainless BBQ island?**

It has a brushed stainless finish, which is common on outdoor kitchen parts, so it goes with most stainless appliances and islands. Shades can vary a little between brands, but it usually blends in well.

**Q: How hard is this door to install, and what tools do I need?**

It's a pretty easy DIY job. You'll mainly need a drill, a screwdriver (usually Phillips), a level, and maybe a caulk gun for sealing. It mounts flush, so measure your cutout carefully if you want a clean finish.