# 29" Sunstone Universal Appliance Jacket - SUNJK29

> 29" double-walled 304 stainless steel jacket for the SUN24PCB and burners up to a 23" W x 12" H x 22" D cut-out. Installs high or low.

- Price: $702.00
- Availability: In stock
- SKU: SUNJK29
- Brand: Sunstone Metal Products
- Category: Outdoor Cooking > Grill & Burner Jackets
- Page: https://sunstonemp.com/products/29-sunstone-universal-appliance-jacket-item-no-sunjk29

## Description

The 29" Sunstone Universal Appliance Jacket (SUNJK29) is made for the SUN24PCB power burner and also takes several other power burner brands out of the box with minor assembly. It is double-walled 304 stainless steel and gives the burner a heat barrier and proper venting inside an outdoor kitchen or BBQ island.

It fits most burners with a maximum cut-out of 23" W x 12" H x 22" D and installs in either a high or low position. The burner rests on the upper rim and hangs free inside. A self-supporting raised ledge runs around the sides and back.

Vents at the lower front and upper back edges pass excess heat and gas through. Covered utility ports stay closed except the one your gas or electrical line uses. It works with natural gas or propane. With a cabinet peg-leg fastened to each bottom corner, the jacket can sit on a picnic table or blocks until the island is built.

## Specifications

| Spec | Value |
| --- | --- |
| Collection | Grill & Burner Jackets |
| Width | 29" |
| Material | 304 Stainless Steel |
| Installation | High or Low position |
| Compatibility | Most burners with max 23" W x 12" H x 22" D cut-out |
| Assembly | Minor Assembly Required |
| Cut-Out Depth | 24-1/4" |
| Cut-Out Height | 13" |
| Cut-Out Width | 27-3/4" |
| Max Appliance Size | 23" W x 22" D x 10" H (12" H with the vent panel removed) |
| Raised Burner Height | 1" above Counter |

## Features

- For the SUN24PCB and most burners up to a 23" W x 12" H x 22" D cut-out
- Installs in a high or low position
- Double-walled 304 stainless steel
- Pass-through venting for heat and gas
- Covered left and right utility ports
- Minor assembly; optional peg-legs for table or block use

## Options

- Product Options: Liquid Propane- SUN24PCB (+$4,998.00), Natural Gas - SUN24PCB (+$4,998.00)

## Manuals & documents

- [SUNJK29 Spec Sheet](https://sunstonemp.com/media/sites/site_affv5holph/manus-storage/SUNJK29_SPEC_SHEET_82a11163.pdf)

## Questions & answers

**Q: Is there a warranty on this jacket, and who do I contact if there's a problem?**

Yes. Coverage details are on our warranty page. For any issue or warranty claim, contact us with your order number.

**Q: Best way to clean this appliance jacket?**

Warm water, a little mild dish soap and a soft cloth on the stainless surfaces. For tougher stains or to bring the shine back, use a stainless steel cleaner. Avoid abrasive scrubbers or harsh chemicals that could scratch the finish.

**Q: What's the jacket made of? Will it hold up to Florida weather?**

It's 304 stainless steel, which is great outdoors. It resists rust, corrosion and extreme temperatures, so it's very durable even in harsh conditions like Florida's. Regular cleaning will keep it looking good longer.

**Q: Will this jacket work with my Lynx grill or side burner?**

It isn't tied to one brand. As long as your Lynx grill or side burner's outside dimensions fit within the jacket's interior, it should work fine. Check your appliance's dimensions against the jacket's inside measurements to make sure it's a proper, safe fit.

**Q: How hard is the jacket to install, and does it come with everything I need?**

It's pretty easy if you have basic DIY skills. It recesses into your island for a finished look. Mounting hardware is included, but your island opening needs to be sized for a snug fit, usually around 29 inches wide depending on the appliance going in.