# 18" Sunstone Universal Appliance Jacket - SUNJK18

> 18" double-walled 304 stainless steel jacket for burners up to a 12" W x 10" H x 22" D cut-out, such as the SUN13CPRO and SUN13VDB.

- Price: $558.00
- Availability: In stock
- SKU: SUNJK18
- Brand: Sunstone Metal Products
- Category: Clearance
- Page: https://sunstonemp.com/products/18-sunstone-universal-appliance-jacket-sunjk18

## Description

The 18" Sunstone Universal Appliance Jacket (SUNJK18) is a double-walled 304 stainless steel enclosure for setting a burner such as the SUN13CPRO or SUN13VDB into an outdoor kitchen or BBQ island. It gives the burner a heat barrier and proper venting, and it takes several burner brands out of the box with minor assembly.

It fits most burners with a maximum cut-out of 12" W x 10" H x 22" D. The burner rests on the upper rim and hangs free inside the jacket, 1" above the counter. A self-supporting raised ledge runs around the sides and back, and the jacket is a zero clearance design.

Vents along the lower front edge and upper back edge let excess heat and gas pass through. Covered utility ports let you open only the side your gas or electrical line uses; the others stay covered. It works with natural gas or propane burners. You can also fasten a cabinet peg-leg to each bottom corner and set the jacket on a picnic table or blocks until the island is built. See our warranty page for coverage.

## Specifications

| Spec | Value |
| --- | --- |
| Collection | Grill & Burner Jackets |
| Width | 18" |
| Fuel Type | Natural gas or propane |
| Material | 304 Stainless Steel |
| Compatibility | Most burners with max 12" W x 10" H x 22" D cut-out |
| Raised Burner Height | 1" above Counter |
| Adjustable Legs | Accepts a cabinet peg-leg at each bottom corner |
| Assembly | Minor Assembly Required |
| Design | Zero Clearance, Double Walled |
| Installation | Built-in, Post-mount (with SUNJKPOST) |
| Max Appliance Size | 12" W x 22" D x 10" H (20-1/2" D with the panel installed) |
| Compatible Cut-Out Depth | 22" |
| Max Burner Cut-Out Width | 12" |

## Features

- Fits burners up to a 12" W x 10" H x 22" D cut-out
- Double-walled 304 stainless steel, zero clearance
- Pass-through venting at lower front and upper back
- Covered utility ports
- Raises the burner 1" above the counter
- Optional peg-legs for use on a table or blocks

## Options

- Product Options: Liquid Propane- SUN13VDB-LP (+$860.00), Natural Gas - SUN13VDB-NG (+$860.00), Liquid Propane- SUN13CPRO-LP (+$1,110.00), Natural Gas - SUN13CPRO-NG (+$1,110.00)

## Manuals & documents

- [SUNJK18 Spec Sheet](https://sunstonemp.com/media/sites/site_affv5holph/manus-storage/SUNJK18_SPEC_SHEET_f11dad4c.pdf)

## Questions & answers

**Q: What warranty or support comes with this jacket?**

Coverage details are on our warranty page. It's a good idea to register it when you buy, and if anything goes wrong, contact us with your order number.

**Q: How do I keep this jacket clean after a few seasons of heavy grilling?**

Pretty simple. Most of the time a soft cloth with warm soapy water is all it needs. For tougher grease or grime, use a stainless steel cleaner and polish made for outdoor use to bring the shine back without hurting the finish. Avoid abrasive scrubbers and harsh chemicals so you don't scratch it.

**Q: What's the appliance jacket made of? I'm near the coast and worry about rust.**

It's commercial grade 304 stainless steel, which does really well outdoors, coastal areas included. It resists rust, corrosion and harsh weather, so it keeps its clean look and stays solid for years even with salt air. Rinsing it with fresh water now and then helps keep the shine.

**Q: Will this jacket really fit any 18 inch outdoor appliance, or does it work better with certain brands?**

It's made to fit most 18 inch wide outdoor appliances from different brands, including grills, side burners and power burners. It has the Sunstone name on it, but the dimensions are standard, so you get a clean, finished look. Check your appliance's cutout dimensions against the jacket's specs before you order to make sure it's a snug fit.

**Q: How hard is the 18 inch appliance jacket to install, and do I need special tools?**

With basic DIY skills it's usually pretty easy. It mounts flush into your island cutout, and you'll mostly need standard tools like a drill, level and screwdriver. Follow the included instructions for exact measurements and how to secure it so your appliance fits just right.