# 13" Companion Pro Grill Hood - SUN13CPRO-HOOD

> 13" 304 stainless steel hood for the Companion Pro Grill burner, with 800°F temperature gauge, back venting and warming rack.

- Price: $485.00
- Availability: In stock
- SKU: SUN13CPRO-HOOD
- Brand: Sunstone Metal Products
- Category: Parts & Accessories > Side Burner Parts
- Page: https://sunstonemp.com/products/13-companion-pro-grill-hood-sun13cpro-hood

## Description

The Sunstone 13" Companion Pro Grill Hood (SUN13CPRO-HOOD) turns the Companion Pro Grill burner (SUN13CPRO) into a standalone covered grill. With the hood on you can grill, sear, griddle, smoke and deep fry.

The hood is 304 stainless steel and matches the finish of the Companion Pro Grill. A built-in temperature gauge reads up to 800°F. The back venting system controls airflow, cuts down on flare-ups and shortens heat-up time. An integrated warming rack holds food at low heat while you cook.

It installs with the existing Companion Pro burner and vent panel and runs on propane or natural gas through that burner. It weighs about 15 lbs.

## Specifications

| Spec | Value |
| --- | --- |
| Type | Grill hood |
| Collection | Side Burner Parts |
| Width | 13" |
| Fuel Type | Propane and Natural Gas (via Companion Pro Burner) |
| Material | 304 Stainless Steel |
| Installation | Built-in |
| Weight | Approx. 15 lbs |
| Temperature Gauge Range | Up to 800°F |

## Features

- Fits the Sunstone Companion Pro Grill burner
- 304 stainless steel, 13" wide
- Temperature gauge reads up to 800°F
- Back venting for airflow, fewer flare-ups and faster heat-up
- Integrated warming rack
- Grill, sear, griddle, smoke or deep fry
- Propane or natural gas via the Companion Pro burner
- Weight: approx. 15 lbs

## Manuals & documents

- [Companion PRO Manual](https://sunstonemp.com/media/sites/site_affv5holph/manus-storage/CompanionPRO_Manual_4349ced0.pdf)

## Questions & answers

**Q: Does this hood come with a warranty or support?**

Coverage details are on our warranty page. If you have a problem, contact us with your order number and we'll help with troubleshooting or a warranty claim.

**Q: How do I keep this hood looking new?**

Wipe it down regularly with a soft cloth and mild detergent or a stainless steel cleaner. For stubborn grease or stains, use a non-abrasive scrubber and go with the grain. Avoid harsh chemicals and abrasive pads, they scratch the stainless and wear down its protective layer.

**Q: What's this hood made of? I need something that can handle Florida weather.**

It's 304 stainless steel, which does well outdoors, even in a climate like Florida's. It resists rust, corrosion and temperature extremes, so the hood keeps its looks and works well for years. Regular cleaning helps protect the finish from salt air and humidity.

**Q: My Sunstone grill isn't a Companion Pro. Will this hood still fit?**

It's made specifically for the 13 inch Companion Pro grill. Some Sunstone parts do cross over, but check your grill's model number and dimensions first. On a grill it isn't made for, the hood may not seal right or may look off, so compare your grill's specs with the Companion Pro's.

**Q: How hard is this hood to install? Does it come with everything?**

With basic DIY skills it's pretty straightforward. It drops in and usually needs a cutout that matches its 13 inch footprint. The mounting hardware is included, but you'll need a drill and screwdriver to secure it to your grill base.