The 18 In. Sunstone Universal Appliance Jacket for SUNCPRO & SUN13VDB is uniquely designed to receive multiple Burner Brand Models right out of the box with minor assembly. The jacket is a safety essential when installing your burner into any outdoor kitchen or BBQ island enclosure ensuring you have an adequate heat barrier and proper venting. This jacket has double-walled construction in all 304 stainless steel with a sturdy self-supporting raised ledge around the sides and back that adds one more layer of quality to your outdoor kitchen. The Sunstone Jacket is made for perfect airflow with in/out vent in the lower front bottom edge and upper back edge which features open vents allowing pass-through venting of all excess heat and dangerous gasses. It has a universal design with covered utility ports on either side depending on which side your appliance gas or electrical is connected, you only need to open the specific ports you are using, and others stay covered for safety. The Jacket is compatible with most burners with a max “CUT-OUT” size between 12 In. Width by 12 In. Height by 22 In. Depth, with the burner placed on top of the upper rim so the burner is free hanging within the interior of the jacket enclosure. In addition, you can fasten at the bottom of each corner a cabinet peg-leg allowing you to place the jacket with burner onto any surface like a picnic table or blocks for when you’re ready for your new burner or grill but not ready for the whole kitchen island. Make your kitchen a snap with the complete Jacket, Wings & Post Mount package combined to allow your burner or grill to free-stand in a stationary position as a Post-Mount Burner or Grill of your choice. See the Jacket Specification Sheet for more information, the second page refers to your burner “Cut-Out” Dimensions. Convert your jacket into a Post-Mount Grill by purchasing the Jacket Side Wings & Post Mount Item No. SUNJKWING, & SUNJKPOST. Additionally, purchase the SUNJKDIV6 to expand the jacket package with multiple other appliances all within a single cut-out.
  • Works w/SUNCPRO & SUN13VDB
  • Lifetime Structure Warranty
  • 304 Stainless Steel Structure
  • Raises Burner 1 Inch above Counter
  • Minor Assembly Required
  • Zero Clearance Design
  • Universally Compatible
  • Left/Right Utility Ports
  • Double Walled Barrier
  • Pass-Through Venting

Disclaimer: The trademarks used in the “Product Option” Bullet Points above belong to their respective owners who do not sponsor nor are they affiliated with Sunstone Metal Products LLC. The specific product Cut-Out Dimensions have not been directly confirmed by any Sunstone Metal Products LLC, representative or employee. Use own discretion to confirm exact product fit.

18″ Sunstone Universal Appliance Jacket – SUNJK18


  • Works w/SUNCPRO & SUN13VDB
  • Universally Compatible
  • 304 Stainless Steel Structure
  • Product Size: 18-1/4"W x 25-3/4" D x 14-1/2" H
  • Cut-Out Size: 17" W x 24-1/2" D x 13" H
  • Sleeve Opening: 12"W x 12"H x 22"D
  • Popular Product Options


    13" Double Side Burner


    13" Companion Pro Griller

    Sleeve Opening:

    12″ Width x 12″ Max Height or 10″ w/Vent Panel x 22″ Depth or 20-1/2″ Depth w/Panel Installed

    Product Options:

    Sunstone® 13″ Companion Pro – SUN13CPRO, Sunstone® 13″ Double Burner – SUN13VDB, DCS® 14″ Double Burner, Coyote® 13″ Double Burner, Twin Eagles® 13″ Double Burner, Fire Magic® Double Burner

    Post-Mount Grill Upgrade

    Add the Post and Wings to convert the Jacket into a Post-Mount Grill. Additionally add the 6" Divider to Group Multiple Jackets together either for standard Island Installation or within groups of Post-Mount Grill Packages.

    22-1/2"H Post fixture mount for grill jacket
    14"W X 20-1/2"D Two adjustable wings w/brackets for grill jacket
    6" Sunstone Universal Appliance Jacket “Divider”
    Order total:
    My cart
    Your cart is empty.

    Looks like you haven't made a choice yet.